• IO Shield
• 3 2-port SATA Power cables
• 1 2-port USB and Firewire bracket
• 6 SATA Data cables
• 1 IDE-ATA 133 HDD cable
• 1 2-way SLI bridge
• 1 3-way SLI Bridge
• 1 3-way SLI with PhysX bridge
• Installation CD
• Visual Guide
• EVGA X58 SLI Classified motherboard
• EVGA ECP (optional)

EVGA really went all out with their motherboard packaging. The board comes with no less than 3 SLI bridges, one for 2-way, one for 3-way and one for 3-way with a fourth card for PhysX. In terms of hardware the motherboard comes with 6 SATA Data and 3 2-port SATA cables, providing support for the SATA ports. An IDE cable is also included to support DVD drives or the old IDE HDD.

EVGA includes an EVGA Control Panel with their X58 3X SLI Classified packaging but not their X58 3X Classified board as it is an additional purchase. The ECP has a Reset button, a Power button, a Clear CMOS button, LEDs for the CPU VCore Booster, a Debug LED and jumpers for enabling/disabling PCI Express slots on a mini card. To install the ECP simply attach the included black cable to the P80P headers and one end to the card. To use the PCI Express Disable jumpers on the ECP remove the jumpers from the motherboard and use the PCIE jumper cable to connect them.